Plextor PX-750A Installation And User Manual page 71

9. With the two side bezel hooks released, tilt the top of the bezel
slightly forward to release the top catch, then slide the bezel forward
to remove it.
Figure 31: Pull forward gently to remove the front bezel
CAUTION: Do not touch any of the internal components that are visible.
10. Position the new bezel in front of the drive and slide it gently in
place. Ensure that the top clip and all three bezel hooks lock into
place.
Figure 32: Slide the new bezel into position and make sure all three
Section 5. Maintenance and Troubleshooting
bezel hooks snap into place
PX-750 Installation and Users Manual
61