Features Of The Px-750 - Plextor PX-750A Installation And User Manual

Features of the PX-750

• Internal ATAPI or external USB/FireWire interface:
The PX-750A internal drive easily installs in virtually any PC
with an E-IDE ATAPI interface.
The PX-750UF external drive features both USB 2.0 and
FireWire® (IEEE 1394), to connect to a PC or Macintosh
computer with either of these high-speed interfaces. Supports
both Hi-Speed USB 2.0 (480 megabits per second) and Full-
Speed USB 1.1 (12 megabits per second).
• High speed transfers: The PX-750 supports data transfers via Ultra
DMA Mode 4, DMA Mode 2, and PIO Mode 4.
• MMC compliance: Supports the MMC-3 command set.
• Flash memory: Allows upgrading the PX-750 to the latest firmware
revision (available free from the Plextor web site) without opening
the computer or the drive.
• Black tray: Reduces the effect of optical distortion by absorbing
reflections from the laser beam, enhancing read quality.
• Plug and Play: Supports Windows Plug and Play.
• Digital and analog audio outputs in the PX-750A: The PX-750A has
output connectors for both digital (SPDIF) and analog audio output.
• CPRM support: The PX-750 supports Content Protection for
Recordable Media, so you can play CPRM copy-controlled media.
• Small form factor: To save space inside your computer, depth of the
PX-750A is just 6.69 inches (170 millimeters), including the bezel.
Section 1. Getting Started
PX-750 Installation and Users Manual
3