Rear Panel (continued)
Analog Audio
Output
Connector
Digital Audio
Output
Connector
Mode Jumper
DMA Jumper
Dimensions and Weight, PX-716AL Internal ATAPI Drive
Dimensions
(W/H/D)
(excluding
front panel)
Weight
Stereo analog output, Molex connector (L*G*G*R),
MPC-3 standard:
Output voltage (max. volume): 0.55V(rms) ±1V
Load impedance: 10 k ohms
S/N ratio: Min. 80dB
Total harmonic distortion+noise: Max. 0.08%
(1kHz)
Dynamic range: Typically 75dB (1kHz)
Channel separation: Typically 70dB (1kHz)
Frequency response: 20Hz to 20kHz
(0dB +1/–5dB)
Digital audio output for input to SPDIF or Digital-In
input
Master (default), slave, cable select (CSEL)
Open (no jumper): Ultra DMA mode 0-4 (default)
Short (jumper installed): Multiword DMA mode 0-2
5.75" x 1.63" x 7.05"
146 mm x 41.3 mm x 179 mm
< 2.3 lbs. (1.05 kg)
PX-716AL Installation and Users Manual
Appendix A: PX-716AL Specifications
65