Plextor PX-716AL Installation And User Manual page 70

Appendix A: PX-716AL Specifications
Front Panel
Eject
Disc/busy
Indicator
Disc Loading
Rear Panel
Power Supply
Power
Consumption
IDE Interface
Connector
64
PX-716AL Installation and Users Manual
Eject button; manual emergency eject;
software eject.
Yellow when initializing, reading, or ejecting disc.
Green during standby and when Buffer Underrun
Proof Technology or Lossless Linking/Zero Link
is active.
Blinking amber when writing to disc. Blink rate
indicates writing speed.
Auto
Typical standby current
Typical DVD read
current (DVD 16X)
Typical CD read current
(CD 48X)
Typical DVD write
current (DVD+R 16X)
Typical write current
(CD-R 48X)
Typical pause current
Peak current
Average 22.2 W for DVD read/write
IDE bus, 40-pin flat ribbon type. Interface complies
with ATA/ATAPI-5. Must use 80-conductor IDE/ATA
cable.
NOTE: Although the PX-716AL will operate with a
40-conductor cable, it may not be able to write DVDs
at 16X unless an 80-conductor IDE/ATA cable is
used.
Maximum total cable length cannot exceed 18 in
(45.7 cm).
DC +12V, DC +5V,
±10% ±5%
100 mA 230 mA
1.4 A 700 mA
1.4 A 750 mA
1.4 A 1.4 A
1.4 A 800 mA
700 mA 500 mA
2.0 A 1.7 A