Volvo XC90 Recharge Owner's Manual page 247

7. Tap on Confirm in order to add the time
setting.
> The time setting is added to the list and
is activated.
WARNING
Do not use preconditioning 7 :
In unventilated spaces indoors.
•
Exhaust gases are emitted if the heater
starts.
In locations with combustible or flam-
•
mable material nearby. Fuel, gas, long
grass, sawdust, etc. may ignite.
When there is a risk that the heater's
•
exhaust line may be blocked. For
example, deep snow inside the front
right-hand wheel housing can obstruct
the heater's ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a
long time in advance.
Editing a time setting
1. Open the climate view in the centre dis-
play.
2. Select the Parking climate
7 Applicable to fuel-driven auxiliary heater.
3. Press the time setting that is to be
changed.
> A pop-up window is shown.
4. Edit the time setting in the same way as
described in "Adding a time setting"
above.
Related information
Preconditioning (p. 241)
•
Preconditioning time setting (p. 243)
•
Activating and deactivating time setting
•
for preconditioning (p. 245)
Removing time setting for preconditioning
•
(p. 246)
tab.
Activating and deactivating time
setting for preconditioning
A time setting in the timer for preconditioning
can be activated or deactivated based on
need.
The timer buttons in the Parking climate tab in the
climate view.
1. Open the climate view in the centre dis-
play.
2. Select the Parking climate
3. Activate/deactivate a time setting by tap-
ping on the timer button to the right of the
setting.
> The time setting is activated/deacti-
vated and the button illuminates/extin-
guishes.
CLIMATE
tab.
}}
245