Table of Contents
Advertisement
Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Route the power-button board cable through the slot on the front panel.
2
Align and snap the power-button module into the slot on the front panel.
3
Connect the power-button board cable to the system board.
Post-requisites
1
Follow the procedure from step 5 to step 8 in
2
Replace the
front
3
Replace the
computer
58
computer. After working inside your computer, follow
After working inside your
bezel.
cover.
computer. For more safety best
www.dell.com/
"Replacing the optical
Before
drive".
Advertisement
Table of Contents
