Replacing The Power-Button Module; Procedure; Post-Requisites - Dell D14S Service Manual

Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Slide the power-button cable through the slot on the chassis.
2 Align and push the power-button module into the slot on the front panel
till the clips on the module snap in place.
3 Connect the power-button cable to the system board.

Post-requisites

1 Follow the procedure from step 4 to step 7 in
2 Replace the front
3 Replace the computer
62
computer. After working inside your
bezel.
cover.
After working inside your
"Replacing the drive cage".