Commissioning; Safety Instructions - Beko BEKOKAT CC-720 Installation And Operation Manual

Commissioning

5.1

Safety instructions

DANGER Compressed air! Gases under high pressure
Any contact with escaping compressed gas or not secured
system parts will create danger of serious injuries or death.
 Only
 Always inspect all system parts before pressure build-up and tighten
 Open valves slowly to prevent pressure blow outs during operation.

DANGER Risks due to damaged components

DANGER Excessive pressure / temperature




V01 /11-038
executeinstallation work and
depressurised status.
them.
The general statutory safety and accident prevention regulations
apply.
If you suspect that the BEKOKAT
operation. Damaged components can impair the functional safety and
cause additional damage.
Suitable measures must be implemented to ensure that the
permissible operating pressure and operating temperature are not
exceeded on the plant.
It is the duty of the operating company to ensure that the connected
pressure generator is protected against exceeding the maximum
operating excess pressure of 16 bar (g) and the temperature limits on
®
the BEKOKAT .
It must be ensured that the pressure generating compressor and the
compressed gas system are secured and safe.
Suitable measures must be implemented to ensure that the
permissible operating temperature is not inadvertently exceeded by
ambient conditions at the installation location.
Installation and Operation Manual BEKOKAT
maintenance work in a
®
is damaged, then do not put it into
®
55 / 88