Electrical Installation; Safety Instructions - Beko BEKOKAT CC-720 Installation And Operation Manual

4.6

Electrical installation

4.6.1

Safety instructions

DANGER Electric power
Touchable conductive parts can lead to dangerous voltages / mains
voltage during installation and maintenance or in case of defects. Hazard
resulting in of serious or even fatal injury from electric shock when coming
into contact with uninsulated parts or mains voltage.








V01 /11-038
All work on the electrical part of the assembly unit may only be carried
out by suitably trained skilled technical personnel.
®
The BEKOKAT must not be put into operation when the power
supply cables have been damaged or parts of the housing have been
damaged or removed.
The valid legal regulations and provisions at the local place of use
must be complied with without exception.
Observe the electrical data provided on the rating plate.
Work on the electrical connections may only be executed when the
power supply is switched off. The system must be secured against
unintentional restart.
Only utilise components for the electrical installation which have a
current authorisation and are labelled with a CE-Identification
marking.
The wire ends to be connected to the control unit must be equipped
with wire-end ferrules.
All electrical connections must be inspected before commissioning
and at regular intervals.
Installation and Operation Manual BEKOKAT
®
49 / 88