Brother MFC-J2330DW Online User's Manual page 721

Level 1 Level 2
WLAN TCP/IP
Setup Wizard
WLAN
Assistant
WPS
WPS w/ PIN
Code
WLAN Status
MAC Address
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device
Information
Level 3 Level 4
WINS Server -
DNS Server -
APIPA -
IPv6 -
- -
- -
- -
- -
Status -
Signal -
SSID -
Comm. Mode -
- -
- -
- -
- -
- -
Device Name -
SSID -
IP Address -
Descriptions
Specify the IP address of the
primary or secondary WINS
server.
Specify the IP address of the
primary or secondary DNS
server.
Set the machine to allocate the
IP address from the link-local
address range automatically.
Turn the IPv6 protocol on or off
for a wireless LAN. To use the
IPv6 protocol, go to the Brother
Solutions Center at
support.brother.com for more
information.
Configure your internal print
server manually.
Configure your wireless
network settings using the
Brother CD-ROM.
Configure your wireless
network settings using the one-
button push method.
Configure your wireless
network settings using WPS
with a PIN.
View the current wireless
network status.
View the current wireless
network signal strength.
View the current SSID.
View the current
Communication Mode.
View the machine's MAC
address.
Configure your Wi-Fi Direct
network settings using the one-
button push method.
Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
Configure your Wi-Fi Direct
network settings manually.
Set your machine as the Group
Owner.
View your machine's device
name.
View the Group Owner's SSID.
When the machine is not
connected, the LCD displays
Not Connected.
View your machine's current IP
Address.
714