Brother MFC-J2330DW Online User's Manual page 720

Level 1 Level 2
Remote Access -
Dial Restriction Dial Pad
Address Book
Shortcuts
Remaining Jobs -
Miscellaneous Caller ID
Type
Fax Mode
[Settings] > [All Settings] > [Network]
Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
WLAN TCP/IP
Level 3 Descriptions
- Set your own code for Remote Retrieval.
- Set the machine to restrict dialling when using the dial pad.
- Set the machine to restrict the dialling when using the Address
Book.
- Set the machine to restrict the dialling when using a Shortcut.
- Check which scheduled jobs are in the machine's memory and
cancel selected jobs.
- Switch the mode if Caller ID cannot be displayed normally.
- Select the transmission process when sending/receiving the
faxes manually.
Level 3 Level 4
BOOT Method -
IP Address -
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server -
DNS Server -
APIPA -
IPv6 -
- -
- -
- -
BOOT Method -
IP Address -
Subnet Mask -
Gateway
-
Node Name -
WINS -
Configuration
Descriptions
Select the BOOT method that
best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration
mode.
Specify the IP address of the
primary or secondary WINS
server.
Specify the IP address of the
primary or secondary DNS
server.
Set the machine to allocate the
IP address from the link-local
address range automatically.
Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com for more
information.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC
address.
Select the BOOT method that
best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration
mode.
713