Related Manuals for Beko BDV 7200X
Summary of Contents for Beko BDV 7200X
- Page 1 Front-Loading Dryer Owner’s Guide: Installation and Operation Instructions BDV 7200X 2960311918_EN/301219.1632 Dryer / User Manual 1 / EN...
- Page 2 Please read this user manual first! Dear Customer, Thank you for prefering a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 6 Technical Specifications 1 Your Dryer 2 Important Safety Instructions 7 User maintenance and cleaning instructions 3 Installation Instructions 7.1 Lint filter ..........22 7.2 Sensor ..........22 3.1 Electrical connection ......8 3.2 Grounding Instructions .......10 8 Troubleshooting 3.3 Appropriate installation location ..11 3.4 Minimum Installation Clearances ..12 9 Warranty Statement 3.5 Use on top of a washer ......12... -
Page 4: Your Dryer
Overview Figure 1 Control Panel Type label Loading Door Adjustable Feet Lint Filter NOTE: Specifications of this appliance may change without notice to improve the quality of the product. Drawings in this manual are schematic and may not match your product exactly. Values stated on the dryer labels or in the documentation accompanying it are obtained in the laboratory in accordance with relevant standards. -
Page 5: Important Safety Instructions
Important Safety Instructions WARNING: To reduce the risk of fire or electric shock resulting in serious injury or death when using this appliance, follow the basic precautions including the following: • Read all instructions before using the appliance. Failure to follow these instructions will increase the risk of fire or electric shock and will void the warranty. - Page 6 • This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounded plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
- Page 7 • Beko does not recommend the use of fabric softening dryer sheets in our Electric Dryers. The contents of these sheets can clog the units filters, causing reduced air flow and possible damage to the heating system.
- Page 8 • Do not allow children to play on or in the appliance.Close supervision of children is necessary when the appliance is used near children. • Keep pets away from the appliance during the drying cycle. • Before the appliance is removed from service or discarded, remove the door to the drying compartment.
-
Page 9: Installation Instructions
Installation Instructions WARNING: Failure to follow Neutral conecction is not used these instructions could result in this product in a risk of fire •The clothes dryer (“appliance‘) installation must be performed by a qualified installer. •Install the appliance according to the manufacturer’s instructions and local codes. -
Page 10: Grounding Instructions
To change the cord: The dryer is now ready to be plugged into the 3-wire receptacle of the proper rating. 1. Make sure that the dryer is not plugged into any power outlet. The receptacle should be located so that the DO NOT plug end of dryer power plug and receptacle will be accessible with the cord into a live receptacle before... -
Page 11: Appropriate Installation Location
3.3 Appropriate installation location •Install your appliance in environments that have no risk of freezing and are in a stable and level position. •Do not place your appliance on a high pile rug or on similar surfaces. •Operate your appliance in a well-ventilated, dust-free environment. -
Page 12: Minimum Installation Clearances
” 36.14 (918 mm) min. 33 ¾" (856,5 mm) Ventilation Requirements 3.4 Minimum Installation Closet door must have 2 openings, one Clearances located 3.2 inches (8 cm) from bottom of door having a minimum area of 16 sq. inches (103 cm2) and the other one located 3 inches (7.5 Alcove or cm) from top of door having a minimum area... -
Page 13: Adjusting The Feet
•Place the appliance on a solid floor. If it 1.Connect the air outlet metal duct to the is to be placed on top of a washer, the spacer by turning it counter-clockwise. approximate weight together may reach 397 2.Make the duct passages as shown in the lbs (180 kg) when they are full. -
Page 14: Destroying Packaging Material
The ventilation duct can be routed The end of the hose should not be outdoors via a window or it can bent, it should not be stepped on be connected to the air outlet in a and it must not be folded between bathroom. -
Page 15: Operating Instructions
Operating Instructions WARNING: To reduce the risk of fire, electric shock, or personal injury, read the 2. IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. LAUNDRY DRYING SYMBOLS Drying Suitable for No Iron Do not dry- Sensitive / Do not dry Do not dry Symbols dryer... -
Page 16: Preparing Clothes To Be Dried
•Overly wet laundry or laundry with dripping The following weights are given as examples. water must not be put into the dryer. 4.4 Preparing clothes to be Home articles Weight (g)* Weight (lb)* dried Cotton quit covers (double) 1500 3 ¼ •All laundry must be spun at the highest Cotton quit covers (single) 1000... -
Page 17: Operating The Product
Operating the product 5.1 Control Panel Super Extra Normal F lter Damp F lter Damp Lock Lock T med Buzzer On/Off/Program selection button 4. Buzzer volume button Start/Pause button Drying level/Time programs selection button End Time button 5.2 Symbols Filter drawer / Filter Child-proof Mute... -
Page 18: Program Selection And Consumption Chart
5.4 Program selection and consumption chart Spin speed in wash- Wight Drying time Programs Explanation (Ib) (minutes) machine (rpm) Cottons/Nor- Durable clothing can be dried with this Medium program at a normal temperature. Less durable clothing can be dried with this program at a at a lower temperature Perm Press compared to the cottons program. -
Page 19: Auxiliary Functions
Drying level Changing the end time If you want to change the duration during the countdown: Use for heavy-duty fabrics in to be Super very dry Cancel the program by turning the On/Off/ Program selection knob. Select the program Extra Use for extra drying you want and repeat the End Time selection process. -
Page 20: Changing The Program After It Is Started
When the child lock is activated, Adding laundry after the drying the child lock warning indicator on operation starts may cause the the screen turns on. dried laundry inside the machine Child lock deactivates when the to mix with wet laundry and leave drying machine is turned off and on the laundry damp at the end of by the On/Off/Cancel knob. -
Page 21: Technical Specifications
Technical Specifications Model Vented Dryer with electronic sensor control Height (in) 33 1/4 Witdth (in) 23 7/16 Depth (in) 22 15/16 Height adjustment of feet (in) 1 1/16 Net weight (plastic front door usage) (lbs) 69,7 Net weight (glass front door usage) (lbs) 73,4 Voltage / Frequency 208-240V ~ 60 Hz... -
Page 22: User Maintenance And Cleaning Instructions
User maintenance and cleaning instructions 7.1 Lint filter 7.2 Sensor Lint and fibers released from the laundry in to There are humidity sensors in your dryer that the air during the drying cycle are collected in detect whether the laundry is dry or not. the “Lint Filter”. - Page 23 Troubleshooting Problem Cause Explanation / Solution * Clean the lint filter. *Lint filter may not have been * Meshes of the filter may be cleaned. clogged. Wash with water. *Remove the objects (if any) that *Ventilation grids on the front side of block ventilation in front of the the machine are blocked.
- Page 24 Please contact authorized Beko dealier original manufacturing site. Warranty terms for this or visit www.beko.us to locate and Beko household appliance is not valid if the product is get information for the closest authorized altered, tampered, modifed, additional parts Beko service center.