Table of Contents
Advertisement
MENU
16 | SD2620W
FUNCTION
FUNCTION DESCRIPTION
INFORMATION Provide information about
resolution, H/V frequencies,
and polarity of the input signal.
INPUT SELECT
This OSD reports the current
signal being displayed.
This OSD will automatically turn
off after 2 seconds; you can also
press the Exit key to close it.
OSD WARNING
This OSD gives a warning when
the selected input signal is not
NO SIGNAL
active. After power on or when
the input signal becomes
inactive, this warning appears.
No signal OSD is shown after
0.5 seconds from video mode
detection. This OSD turns off
automatically after 5 seconds,
or when you press the Exit key.
It then changes to the power
saving mode. If the direction
key is pressed during power
saving mode, this warning
OSD opens again.
Advertisement
Table of Contents
