Toyota Matrix 2009 Owner's Manual page 9

Setting and canceling the functions
n
To switch between set and canceled, follow the procedure below:
Close all the doors and switch the engine switch to the "ON"
STEP 1
position. (Perform step 2 within 10 seconds.)
STEP 2
Function
Shift position linked door lock-
ing function*
Shift position linked door
unlocking function*
Driver's door linked door unlock-
ing function
*
: Vehicles with an automatic transmission only
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
1-2. Opening, closing and locking the doors
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch (
imately 5 seconds and then
release.
The shift lever and switch posi-
tions corresponding
desired function to be set or can-
celed are shown as follows.
Shift lever
position
P
N
or ) for approx-
to the
Switch position
1
31