Table of Contents
Advertisement
Touch Screen Driver Installation
The PT1975R/PT1911MX/PT1975S is available with both RS232 and USB
connections. The touch driver is located on the enclosed CD-ROM for these
operating systems: Windows
CE, XP Embedded, Linux, Apple
Please Note: The PT1975R/PT1911MX/PT1975S is Microsoft
(Human Interface Device) compatible if you use the USB touch screen interface.
No additional software driver is required for general operation of the touch
screen. A calibration tool can be installed for improved touch position accuracy.
See "Optional Calibration Tool Install" section for more information.
PT1975R/PT1911MX/PT1975S Optional Calibration Tool Install:
If you would like to use the Optional Calibration Tool, follow the instructions
below. Please note: the calibration tool supports Windows
Embedded, 2000, 98 and ME operating systems via USB only.
1. Open the CD-ROM.
2. Select the monitor size and then model name.
3. Click on the "Load Utility" button that appears to the right of the model name.
4. The HID calibration tool will automatically open. From here the user can
choose to do the following:
a. 4 Points Calibration
b. 9 Points Linearization
c. 25 Points Linearization
d. Clear
e. Draw Test
f.
Advanced. In the Advanced settings area the user may do the following:
i.
Adjust the Double Click Area.
®
7, VISTA 64/32 bits, XP, 2000, ME, 98, NT4.0,
®
Mac OS.
®
®
Windows
®
7, VISTA, XP, XP
24
HID
Advertisement
Table of Contents
