Appendix A - Technical Specifications; General; Physical And Environmental - D-Link DMS-3130 Series Hardware Installation Manual

Layer 3 stackable managed switch
Table of Contents

Advertisement

DMS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide

Appendix A - Technical Specifications

General

Feature
Data Transfer Rates
Physical Stacking
Network Cables

Physical and Environmental

Feature
Internal Power Supply
Optional Redundant Power Supply
Hot-swappable Redundant Power
Supply
Security Lock
Real Time Clock (RTC)
Fans
Description
Standards
Ethernet
Fast Ethernet
Gigabit Ethernet
2.5 Gigabit Ethernet
5 Gigabit Ethernet
10 Gigabit Ethernet
25 Gigabit Ethernet
Stacking Topology: Duplex Chain, Duplex Ring
Stacking Bandwidth: Up to 200 Gbps (depending on the topology)
Stacking Units: Up to 9 switches in a stack
Backup Master Support: Yes
UTP/STP Category 3, 4, 5 for 10BASE-T
UTP/STP Category 5, 5e for 100BASE-TX
UTP/STP Category 5e for 1000BASE-T
UTP/STP Category 7/6/6a for 2.5GBASE-T/5GBASE-T/10GBASE-T
EIA/TIA-568 100-ohm screened twisted-pair (STP) (100 m)
10GBASE-SR Multi-mode, 10GBASE-LR Single-mode, 10GBASE-ER
Single-mode, 10GBASE-ZR Single-mode, 10GBASE-LRM Multi-Mode, 1
m/3m/7m 10G SFP+ Direct Attach Cable (DAC), 1 m 25G SFP28 Direct
Attach Cable (DAC)
Description
AC Input: 100~240 VAC, 50~60 Hz
Available on DMS-3130-30TS only. One connector in back to install
optional external RPS. When internal power fails, the optional external
RPS will take over all the power supply immediately and automatically.
This product is intended to be supplied by UL Listed Power source.
Available on DMS-3130-30PS only. Two hot-swappable RPS in the back
to back up each other. When one power unit fails, the other will take over
the power supply immediately and automatically.
Available on DMS-3130-30TS only. Provides a Kensington-compatible
security lock, on the rear panel of the Switch, to be able to connect to a
secure immovable device. Insert the lock into the notch and turn the key
to secure the lock. The lock-and-cable apparatus should be purchased
separately
Be able to maintain the time setting when the device power is off
The IC Sensor detects the temperature on the switch automatically and
adjusts the speed
43
Full-duplex
20 Mbps
200 Mbps
2 Gbps
5 Gbps
10 Gbps
20 Gbps
50 Gbps

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dms-3130-30psDms-3130-30ts

Table of Contents