Table of Contents
Advertisement
Enable/Disable channel insert functionality
1. Press and hold the channel control for either Channel 1 or 2 until the additional
controls menu appears on the channel display.
2. Rotate the channel control to highlight Insert, then press to select it.
3. Rotate the channel control to highlight your preferred setting, then press to
select it:
• Auto (default): When a wireless transmitter is powered on and connected to
this channel, the l (6.35 mm) TRS channel input is converted into a series
effects loop.
• Off: When a transmitter is powered on and connected to this channel, the
system ignores signals from the channel input.
4. Press and hold the channel control until the additional controls menu disappears.
W I REL ESS T RA N S M ITT E R CO NT R O L S
Press + Hold
to access
additional
product
controls
ToneMatch
Insert
Auto
Wireless
Auto
Expanders
On
Auto
O
|
4 1
E N G
ToneMatch
Insert
Auto
Wireless
Expanders
On
ToneMatch
Insert
Auto
Wireless
Auto
Expanders
On
Auto
O
Advertisement
Table of Contents
