Table of Contents
Advertisement
■
Function limitations
Crawl Control
●
In the following situations, brake control can be used to drive downhill at
a constant speed. However, engine control is not available when driving
uphill at a constant speed.
• When switched to second start mode.
●
In the following situation, engine control and brake control will stop tem-
porarily. In this event, the Crawl Control indicator will flash.
• When the vehicle speed exceeds approximately 15 mph (25 km/h).
Turn Assist function
In the following situations, the Turn Assist function will stop temporarily. In
this event, the Turn Assist indicator will flash.
●
When the vehicle speed exceeds approximately 6 mph (10km/h).
●
When the shift lever is moved to "R".
■
When the Crawl Control system is operated continuously
●
If Crawl Control is used continuously for a long time, the buzzer will
sound, a malfunction notification will be displayed on the multi-informa-
tion display, the Crawl Control indicator will go off, and Crawl Control will
be temporarily inoperable as a result of the brake system overheating. In
this event, stop the vehicle immediately in a safe place, and allow the
brake system to cool down sufficiently until the "TRAC OFF" on the multi-
information display goes off. (In the meantime, normal driving is possi-
ble.)
●
If Crawl Control is used continuously for a long time, the buzzer will
sound, the system will be temporarily canceled, and a malfunction notifi-
cation will be displayed on the multi-information display as a result of the
automatic transmission system overheating. Stop the vehicle in a safe
place until the display goes off.
LC200_OM_OM60L83U_(U)
2-4. Using other driving systems
2
253
Advertisement
Table of Contents
