Honda CB1100CA 2017 Owner's Manual page 106

Tyre Puncture
u
Rear axle shaft
Adjusting bolt
Remove the brake caliper bracket, rear
7.
wheel and side collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc to pad surfaces.
Do not push the brake pedal while the
u
wheel is removed.
102
Removing Wheels
Adjuster
Drive chain
CB1100NA
Place your motorcycle on a firm, level
1.
surface.
Support your motorcycle securely and
2.
raise the rear wheel off the ground using
the centre stand or a hoist.
Loosen the rear axle nut, lock nuts and
3.
turn the adjusting bolts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
Release the rear axle nut/washer.
4.
Pulser ring
Adjusting
Rear axle nut/washer
plate
Wheel speed
sensor
Adjusting bolt
Lock nut