Installing The Receiver - Panasonic TY-WP2B1 Operating Instructions Manual

Installing the Receiver

Components for receiver mounting bracket
Check the following parts are included.
Base bracket (A-1) .................1
(DPVF3503ZA/X1)
Connecting bracket A (A-2) ..1
(DPVF3505ZA/X1)
Used to install on the display.
Connecting bracket B (A-3)... .1
(DPVF3504ZA/X1)
Used to install on the display.
Connecting bracket C (A-4) ....1
(DPVF3506ZA/X1)
Used to install on the projector.
Sheet A (B-1) ..........................1
(DPVF3507ZA/X1)
(30 × 12 mm)
Sheet B (B-2) ..........................3
(DPVF3508ZA/X1)
(24 × 20 mm)
Knurled screw (C-1)...............2
(DPVF3509ZA/X1)
(M4 × 5)
Screw (C-2) ............................6
(DPVF3510ZA/X1)
(M4 × 5)
Screw (C-3) ............................2
(DPVF3511ZA/X1)
(M3 × 8)
Installing on the ceiling or wall
1
Place the base bracket (A-1) aligning it with
the 4 screw holes on the bottom surface of
the receiver.
2
Fix the base bracket (A-1) with 4 screws
(C-2).
The base bracket can be mounted in either vertical or
horizontal direction.
C-2
A-1
English 15