Advertisement
ASSEMBLY PROCEDURE
1.
Preparation.
2.
Check the frame.
3.
Determine the setting-up position.
4.
Install the projector(s).
5.
Carry out adjustments.
INSTALLING THE PROJECTOR
INSTALLATION PROCEDURE
Prepare the tools.
(1)Adjustable spanner or Allen key
(2)Screwdriver
(3)Soft cloth or other soft fabric
Check the load capacity of the set-up location.
Check the structural components.
Select the position for the projectors based on the
size and location of the screen as well as the lens (sold separately)
to be used.
Please see below.
In case of tandem projection: Install the lower projector first,
followed by the upper projector.
Adjust so that the image fits perfectly on the screen
(see adjustment option, page 5). In case of tandem projection,
adjust until images projected by the upper and lower projectors
converge on the screen.
Screw (M6x30)
flat washers (M6)
Place the frame on the projector and align the
screw hole positions.
(Make sure that the front/rear direction is correct
when installing. If the direction is reversed, the
hole positions will not line up.)
Secure the projector to the frame using the six
screws (M6x30) and the twelve flat washers. Glue
the washers to the frame base if desired (M6).
Tightening Torque: 4 ± 0.5 Nm
4.
Advertisement
