Resetting The System; Setting The Key Lock; Using The Language Code List - Pioneer HTZ-370DV Operating Instructions Manual

Additional information

Resetting the system

Use the front panel controls to reset all system
settings to the factory default.
With the system on, press  STANDBY/
•
ON while holding down  USB.
The next time you switch on, all the system
settings should be reset.

Setting the Key Lock

You can disable the front panel buttons by
switching the Key Lock feature on.
1 With the system in standby, press SETUP
and use / to choose KEYLOCK then press
ENTER.
This is shown in the front panel display.
Use / to select LOCK ON or LOCK OFF
2
then press ENTER.

Using the language code list

Some of the language options (see Language
settings on page 28) allow you to set your
preferred language from any of the 136
languages in the Language code list below.
1 Select 'Other Language'.
Use / to select either a code letter or
2
a code number.
Use / to select a code letter or a code
3
number.
See the Language code list below for a
complete list of languages and codes.
09
45
En