Adjusting The Seat Angle - Britax romer EVOLVAFIX User Manual

1. Extend the headrest to its maximum.
2. Keep holding the button on the switch 2 depressed.
3. Tilt the switch 2 up.
P Switch 2 is locked in the upper position.
The headrest can be set to body sizes of between
approx. 125 cm and 150 cm (see "Adjust head-
rest", page 5).
3.2

Adjusting the seat angle

1
1
Adjustment button
The seat can be used at different angles.
1. Pull the adjustment button 1 forwards and slide the
seat to the desired position.
P The seat audibly locks.
2. Check that the seat is locked in place by pulling it.
For fastening types B1 and B2 the following shall
apply (see "Fastening type A and B", page 7):
If you change the angle of the seat, the seat belt
may slacken. Make sure that the seat belt is taut.
IP10199 | 1.1 | 2000038326
1
EVOLVAFIX | BRITAX RÖMER 6