Table of Contents
Advertisement
& Memory Boot Mode
Provides memory detection and training methods.
Auto
Lets the BIOS automatically configure this setting. (Default)
T he BIOS automatically performs memory training. Please note that if the system
Normal
becomes unstable or unbootable, try to clear the CMOS values and reset the board
to default values. (Refer to the introductions of the battery/clear CMOS jumper in
Chapter 1 for how to clear the CMOS values.)
S kip memory detection and training in some specific criteria for faster memory
Enable Fast Boot
boot.
Disable Fast Boot
Detect and train memory at every single boot.
& Realtime Memory Timing
Allows you to fine-tune memory timings after the BIOS stage. (Default: Auto)
& Memory Enhancement Settings
Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal,
Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default: Auto)
ƒ SPD Info
Displays information on the installed memory.
ƒ Memory Channels Timing
d C hannels Standard Timing Control, Channels Advanced Timing Control, Channel Misc
Timing Control
These sections provide memory timing settings. Note: Your system may become unstable or fail to boot
after you make changes on the memory timings. If this occurs, please reset the board to default values by
loading optimized defaults or clearing the CMOS values.
& CPU Vcore/Dynamic Vcore(DVID)/SVID offset/BCLK Adaptive Voltage/CPU Graphics
Voltage (VAXG)/DRAM Voltage (CH A/B)/CPU VCCIO/CPU System Agent Voltage/VCC
Substained/VCCPLL OC/PCH Core
These items allow you to adjust the CPU Vcore and memory voltages.
ƒ Advanced Voltage Settings
This submenu allows you to configure Load-Line Calibration level, over-voltage protection level, and over-
current protection level.
- 27 -
Advertisement
Table of Contents
