Adjusting Loudness - Pioneer Super Tuner IIID AVIC-X710BT Operation Manual

Flash memory multimedia av navigation receiver
Hide thumbs Also See for Super Tuner IIID AVIC-X710BT:
Table of Contents

Advertisement

Customizing preferences
— CD, ROM (for AVIC-X710BT)
— XM and SIRIUS
— AV1 and AV2
— EXT1 and EXT2
! The different source volume level can be
set between iPod and USB.
! When [Flat] is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
[Flat] and a set equalizer curve.
Adjustable parameters
You can adjust the center frequency, level and
Q factor (curve characteristics) of each cur-
rently selected curve band (Low/Mid/High).
! Band:
You can select the equalizer band.
! Frequency:
You can select which frequency to set as
the center frequency.
! Level:
You can select the decibel (dB) level of the
selected EQ.
! Q:
You can select the details of the curve char-
acteristics. (The following figure shows the
characteristic image.)
Touch [EQ] on the "AV Sound Settings"
1
menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on page 159.
2
Touch the one of keys to select a curve
that you want to use as the basis of custo-
mizing.
3
Touch [Customize].
4
Touch [c] or [d] to select the equalizer
band to adjust.
Each time you touch [c] or [d] selects equali-
zer bands in the following order:
Low — Mid — High
5
Touch [c] or [d] to select the desired
frequency.
Touch [c] or [d] until the desired frequency
appears in the display.
Low: 40 Hz — 80 Hz — 100 Hz — 160 Hz
Mid: 200 Hz — 500 Hz — 1 kHz — 2 kHz
High: 3.15 kHz — 8 kHz — 10 kHz —
12.5 kHz
6
Touch [c] or [d] to adjust the level of
the equalizer band.
Each time you touch [c] or [d], the level of
the equalization band increases or decreases.
+6 to –6 is displayed as the level is increased
or decreased.
7
Touch [c] or [d] to select the desired Q
factor.
Touch [c] or [d] until the desired Q factor ap-
pears in the display.
Wide2 — Wide1 — Narrow1 — Narrow2

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
Touch [Loudness] on the "AV Sound
1
Settings" menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on page 159.
Chapter
25
161
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents