Messages For Audio Functions - Pioneer Super Tuner IIID AVIC-X710BT Operation Manual

Appendix

Messages for audio functions

When problems occur with AV source playback, an error message appears on the display. Refer
to the table below to identify the problem, then take the suggested corrective action. If the error
persists, record the error message and contact your dealer or your nearest Pioneer service center.
The messages in "( )" will appear on the "Rear display".
Built-in DVD drive (AVIC-X910BT)
Message
Reading error
(ERROR-02-XX)
Mechanism error
Region code error (DIFFERENT
REGION DISC)
UNPLAYABLE DISC
Thermal error (THERMAL PRO-
TECTION IN MOTION)
Error not defined (ERROR-FF-
FF)
Non-playable tracks are
skipped. (FILE SKIPPED)
Impossible to play all tracks.
(PROCETED DISC)
Flash writing error. Impossible
to write on the flash. (CAN
NOT SAVE DATA)
Authorization Error (AUTHOR-
IZATION ERROR)
Press track list to play and
title will appear.
File Not Playable-High Defini-
tion (FILE NOT PLAYABLE-
HIGH DEF)
Built-in CD drive (AVIC-X710BT)
Message
Reading error
(ERROR-11, 12, 17, 30)
Reading error
(ERROR-10, 11, 12, 15, 17, 30,
A0)
Cause
Dirty
Scratched disc
The disc is loaded upside down
Electrical or mechanical
The disc does not have the same re-
gion number as the navigation sys-
tem.
This type of disc cannot be played
by the navigation system
The temperature of the navigation
system is outside of the normal op-
erating range
Undefined error
Files that are protected by digital
rights management.
All the files on the inserted disc are
secured by DRM.
The playback history for VOD con-
tents cannot be saved for some rea-
son.
The device does not match the de-
vice registered with the VOD provi-
der. VOD content cannot be played
back.
The disc has too many files for all ti-
tles to be displayed at once.
High definition (HD) DivX video can-
not play.
Cause
Dirty
Scratched disc
Electrical or mechanical
Action (Reference)
Clean the disc.
Replace the disc.
Check that the disc is loaded correctly.
Press the RESET button. (Page 26)
Replace the DVD-Video with one bearing the
correct region number.
Replace the disc with one the navigation sys-
tem can play.
Wait until the unit's temperature returns to
within normal operating limits.
Press the RESET button. (Page 26)
The protected files are skipped.
Replace the disc.
! Retry.
! If the message appears frequently, consult
your dealer.
Check whether this device has been regis-
tered with the VOD provider.
Touch the one of listed items to play.
Create playable one and retry.
Action (Reference)
Clean the disc.
Replace the disc.
Turn the ignition switch OFF and back ON, or
switch to a different source, then back to the
CD player.
Appendix
183
En