Table of Contents
Advertisement
3.1
3.1
This section explains how to turn on/off the IP-920E/IP-920D.
3.1.1 Turn on IP-920E/920D
When the power button on the front panel is set to the [ | ] position, the PWR LED turns on.
When IP-920E/IP-920D completes preparations for operation, the RDY LED turns on.
100-240V
Power button
This indicates the on switch, which is used to supply power to the IP-920E/IP-920D.
｜
This indicates the off switch, which is used to disconnect power from the IP-920E/IP-920D.
○
3.1.2 Turn off IP-920E/920D
When the power button on the front panel is set to the [O] position, this equipment is turned off
and the PWR LED turns off.
Turn ON/OFF IP-920E/920D
Power(PWR) LED
PWR ALM
RDY
IN
DWN
FG
MNT
Status(RDY) LED
10/100BASE
RS-232C
E
100M
OPT
LINK
/ACT
41
Chapter 3 Operation Instructions
ANALOG AUDIO IN
IP-920E/IP-920D
Advertisement
Table of Contents
