1
2
3
4
DRAWER INSTALLATION
Place the drawer adjacent to the wall or
cabinet opening. Plug the power supply
cord into the electrical outlet.
Carefully guide the drawer into the
cavity.
Avoid pinching the cord between the
oven and the wall.
Push the drawer in until the mounting
flange is flush with the face of the
cabinet.
Open the drawer. Using the four holes on
the drawer as a template, pre-drill the
cabinet using a 1/16" (1.6mm) drill bit.
5
Secure the drawer using the 4 x 7/8"
(22mm) screws supplied.
11