Swimming Pool Functions - Fujitsu WSYA050ML3 Design & Technical Manual

3-7. Swimming pool functions

Line Access
2055 U Setpoint solar heating
2056 U Setpoint source heating
2057 S Switch difference source heating
2065 S Charging priority solar
2080 S Setpoint source heating
• Setpoint source heating
The controller enables a swimming pool to be heated by the heat pump. An individual setpoint ca
be set by means of line 2056, which appears when the swimming pool function is activated by pa-
rameter line 6046 being set to "Release swimming pool". Use of input H33 (X152) requires an ex-
tension module to be connected to the control.
3-7. Swimming pool functions
Function
Line
2056 Setpoint source heating
Setting range or display
8...80°C
8...35°C
0.5...3°C
Priority 1, Priority 2, Priority 3
No, Yes
Function
- (03-35) -
Factory
setting
26°C
22°C
0.5°C
Priority 1
Yes
3. Function table