Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment - Pioneer Super Tuner III DEH-P3900MP Operation Manual

Audio Adjustments

Introduction of audio
adjustments
5 5
1 Audio display
Shows the audio adjustment status.
2 SW indicator
Shows when the subwoofer output is turned
on.
3 Bass booster indicator
Shows when the bass boost is in effect.
4 Loudness indicator
Appears in the display when loudness is
turned on.
5 FIE indicator
Shows when the front image enhancer is
turned on.
% Press AUDIO to display the audio func-
tion names.
Press AUDIO repeatedly to switch between
the following audio functions:
FAD (balance adjustment)—EQ (equalizer
curve adjustment)—LOUD (loudness)—
SUB.W (subwoofer on/off setting)—80: 0 (sub-
woofer setting)—HPF (high pass filter)—BASS
(bass boost)—FIE (front image enhancer)—
SLA (source level adjustment)
# When the subwoofer controller setting is
P/O :FUL, you cannot switch to SUB.W. (Refer to
page 34.)
# You can select the 80: 0 only when subwoofer
output is turned on in SUB.W.
1
4 4 3 3 2 2
# When the F.I.E. function is on, you cannot se-
lect HPF.
# When the rear output setting is R-SP :S/W,
you cannot select FIE.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Press AUDIO to select FAD.
# If the balance setting has been previously ad-
justed, BAL will be displayed.
2 Press a or b to adjust front/rear speak-
er balance.
FAD :F15 to FAD :R15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FAD : 0 is the proper setting when only two
speakers are used.
# When the rear output setting is R-SP :S/W,
you cannot adjust front/rear speaker balance.
Refer to Setting the rear output and subwoofer out-
put on page 34.
3 Press c or d to adjust left/right speaker
balance.
BAL : L15 to BAL : R15 is displayed as the left/
right speaker balance moves from left to
right.
Section
09
29
En