Honeywell Prestige 2.0 THX9421 Manual page 21

Dealer Informa on
Fig. 55. Finding thermostat password.
Installer Options
The following options are available when you access
Installer Options. For more information on each, press
Help on the thermostat or see Table 3.
Fig. 56. Installer Options screen.
THX9321 PRESTIGE
Menu Item
Create Setup
View/Edit
Current Setup
Set Up
Diagnostics
Installer Test
Data Logs
OK
Wireless Device
Manager
Advanced
Options
NOTE: You can use the thermostat USB port to download
all Installer Setup settings, including your com-
pany name and contact information. You can
upload this data to each thermostat you install, to
save time.
Making Changes to Installer Setup
Follow these steps to set system options after initial
installation.
NOTE: Use a USB device to save set up time. See "USB
Port" beginning on page 121 for more informa-
tion.
1. Touch Menu.
2. Select Installer Options.
21
®
2.0 AND THX9421 PRESTIGE
Table 3. Installer Options.
Description
Press CREATE SETUP to set all system
settings one by one.
Press VIEW/EDIT CURRENT SETUP to
select a specific function and make quick
changes
Press SET UP DIAGNOSTICS to set up
and test Delta T diagnostics.
Press INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly.
Minimum off timers are ignored during
the test
Press DATA LOGS to view the Alerts Log,
User Interactions Log, and Performance
Logs.
Press WIRELESS DEVICE MANAGER to
add, remove, rename, or view the
connected wireless accessories.
Press ADVANCED OPTIONS to setup the
thermostat using a USB device or to
restore the thermostat to the factory
default settings.
NOTE: If the THX9321 has been setup
WITHOUT an Equipment Interface
Module or the TrueZONE Wireless
Adapter and you would like to add one,
you must reset the thermostat back to
factory defaults.
®
IAQ WITH EIM
68-0311—07