First Use; First Timer Setting; Initial Cleaning - Indesit IFE 3644 J IX User Manual

4 First Use

Before you start using your product, it is re-
commended to do the following stated in
the following sections respectively.

4.1 First Timer Setting

Always set the time of day before
using your oven. If you do not set it,
you cannot cook in some oven
models.
1. When the oven is first started, "12:00"
and symbol will flash on the display.
2. Set the time of day by touching the
keys.
3. Touch or key to activate the
minutes field.
4. Touch the /
5. Confirm by touching the
ð The time of day is set and the
bol disappears on the display.
keys to set the minute.
or key.
sym-
If the first timer is not set, "12:00"
and
and your oven will not start. For
your oven to function, you must
confirm the time of day by setting
the time of day or touching the
key when it is at "12:00". You can
change the time of day setting later
as described in the "Settings" sec-
tion.
In the event of a power outage, the
time of day settings are cancelled.
/
It should be set again.

4.2 Initial Cleaning

1. Remove all packaging materials.
2. Remove all accessories from the oven
provided with the product.
3. Operate the product for 30 minutes and
then, turn it off. This way, residues and
layers that may have remained in the
oven during production are burned and
cleaned.
4. When operating the product, select the
highest temperature and the operating
function that all the heaters in your
product operate. See "Oven operating
functions [} 12]". You can learn how to
operate the oven in the following sec-
tion.
5. Wait for the oven to cool.
6. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a cloth.
Before using the accessories:
Clean the accessories you remove from the
oven with detergent water and a soft clean-
ing sponge.
NOTICE: Some detergents or cleaning
agents may cause damage to the surface.
Do not use abrasive detergents, cleaning
powders, cleaning creams or sharp objects
during cleaning.
EN / 18
symbol continue to flash