Movicon.next Demo Mode; Checking Activated Licenses - Emerson RXi2 Quick Start Manual

Movicon.NExT Demo Mode

Movicon.NExT software can be used to design data flows,
alarms, and HMI screens (Editor mode) as well as execute
already designed projects (Runtime mode). Industrial PCs with
pre-installed Movicon.NExT software are licensed for runtime
operation only and not for editor/development mode. When
launching a project on this IPC, the user is expected to launch
the runtime only (i.e., launch project directly instead of opening
it from the Movicon editor tool). If the user opens the editor tool,
they will see a pop-up stating that it is running in Demo Mode.
This message is referencing the editor functionality only and is
expected. If you need an editor license, please contact your
Emerson sales representative to make your purchase.

Checking Activated Licenses

The RXi2-BP with pre-installed Movicon.NExT software also has a
pre-installed and ready-to-go software license. To check which
features are licensed open the editor tool by going to:
Start->Movicon.NExT->Movicon.NExT 4.2->Options->License->
Check License.
Note: This path opens the editor tool which is not licensed on this
product. Expect to see "demo mode" pop up as detailed in the
Movicon.NExT Demo Mode section above.
9 RXi2 - BP Industrial PC Quick Start Guide GFK-3196E