Movicon.next Demo Mode; Checking Activated Licenses - Emerson RXi2-UP Quick Start Manual

Movicon.NexT Demo Mode

Movicon.NExT software can be used to design data flows, alarms, and
HMI screens (Editor mode) as well as execute already designed projects
(Runtime mode). Industrial PCs with pre-installed Movicon.NExT
software are licensed for runtime operation only and not for editor /
development mode. When launching a project on this Industrial PC, the
user is expected to launch the runtime only (i.e., launch project directly
instead of opening it from the Movicon editor tool). If the user opens
the editor tool, they will see a pop-up stating that it is running in Demo
Mode. This message is referencing the editor functionality only and is
expected. If you need an editor license, please contact your Emerson
sales representative to make your purchase.

Checking Activated Licenses

The RXi2-BP with pre-installed Movicon.NExT software also has a pre-
installed and ready-to-go software license. To check which features are
licensed please open the editor tool by going to: Start->Movicon.NExT-
>Movicon.NExT 4.1->Options->License->Check License.
Note: This path opens the editor tool which is not licensed on this
product. Please expect to see "demo mode" pop up as detailed in
section "Movicon.NExT Demo Mode" above.
15 RXi2 - UP Industrial PC Quick Start Guide GFK-3221A