Front And Rear Panels - Pico Macom PFAD900CS Installation And Operation Manual

Front and Rear Panels

117 VAC Version
PFAD 900cs
AGILE AUDIO VIDEO DEMODULATOR
CATV SERIES
+
RF IN
+
7
220 VAC Version
PFAD 900cs
NTSC
Tru Spec
™
®
PICO MACOM. INC. U.S.A.
CATV SERIES
+
RF IN
+
7
1. Power on LED:
Indicates power is on when lit.
2. Channel Number Display:
Indicates demodulated channel.
3. Mode LED's:
Indicates which mode is operative; TV,
Standard CATV, CATV/IRC or CATV/HRC.
4. Mode Selector Switch:
Push this button to select mode.
5. Channel Down Switch:
Push this button to select lower channel.
6. Channel Up Switch:
Push this button to select higher channel.
7. RF In:
This 'F' connector accepts a 0 to 40 dBmV
signal from an antenna or cable line.
8. Video Out:
This output provides a standard 1 volt peak
to peak baseband video signal. Connect
this output to a video input of a modulator
or TV monitor.
PICO MACOM INC.
12500 Foothill Blvd. • Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
1 2 3
TV
CATV/STD.
CATV/IRC
CATV/HRC
VIDEO OUT
CAUTION
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
8
1 2 3
AGILE AUDIO VIDEO DEMODULATOR
TV
CATV/STD.
CATV/IRC
CATV/HRC
VIDEO OUT
CAUTION
!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
8
P A N E L S
4 5 6
TV/CATV
+
IF OUT 4.5 MHZ OUT MPX OUT AUDIO OUT
+
9 10 11 12
4 5 6
TV/CATV
+
IF OUT 4.5 MHZ OUT MPX OUT AUDIO OUT
+
9 10 11 12
9. I.F Out(45.75 MHz):
A sample I.F. output used to monitor the
status of the tuner and for use with other
up converters.
10. 4.5 MHz Output
Provides audio output for stereo applica-
tions using a BTSC stereo generator.
11. MPX Out:
This output provides a 800mV non de-em-
phasized audio signal. This is an alter-
nate connection for stereo. Before con-
necting this output to the audio input
of a modulator, the pre-emphasis filter on
the modulator must be disabled.
12. Audio Output:
This output provides a de-emphasized
800mV baseband audio signal. Connect
this output to the audio input of modula-
tor or TV monitor.
13. Convenience Outlet:
The AC output is capable of delivering up
to 600W of AC power.
14. Power Cord:
The three prong type power plug connects to
a 120 VAC, 60 Hz electrical output or if
220VAC, 60 Hz, a two prong flat blade type
is used.
+
+
120VAC
60Hz 15W
+
600W MAX
13
14
+
+
220VAC
60Hz 30W
600W
MAX
+
13
14
4