Table of Contents
Advertisement
4 Select the activity settings.
5 Select Auto Climb > Status.
6 Select Always or When Not Navigating.
7 Select an option:
• Select Run Screen to identify which data screen
appears while running.
• Select Climb Screen to identify which data
screen appears while climbing.
• Select Invert Colors to reverse the display colors
when changing modes.
• Select Vertical Speed to set the rate of ascent
over time.
• Select Mode Switch to set how quickly the
device changes modes.
NOTE: The Current Screen option allows you to
automatically switch to the last screen you were
viewing before the auto climb transition occurred.
3D Speed and Distance
You can set 3D speed and distance to calculate your
speed or distance using both your elevation change
and your horizontal movement over ground. You
can use it during activities such as skiing, climbing,
navigating, hiking, running, or biking.
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap
or a rest during an activity using LAP. You can turn
off the Lap Key setting to avoid recording laps due to
accidental key presses during an activity.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
4 Select the activity settings.
5 Select Lap Key.
The lap key status changes to On or Off based on
the current setting.
Using Auto Scroll
You can use the auto scroll feature to cycle through
all of the activity data screens automatically while the
timer is running.
1 Hold MENU.
2 Select Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Scroll.
6 Select a display speed.
Changing the GPS Setting
For more information about GPS, go to
about-gps.
1 Hold MENU.
2 Select Activities & Apps.
40
3 Select the activity to customize.
4 Select the activity settings.
5 Select GPS.
6 Select an option:
GPS and Other Satellite Systems
The GPS + GLONASS or GPS + GALILEO options offer
increased performance in challenging environments
and faster position acquisition than using GPS only.
However, using GPS and another satellite system
together can reduce battery life more quickly than
using GPS only.
UltraTrac
The UltraTrac feature is a GPS setting that records
track points and sensor data less frequently. Enabling
the UltraTrac feature increases battery life but
decreases the quality of recorded activities. You
should use the UltraTrac feature for activities that
demand longer battery life and for which frequent
sensor data updates are less important.
Power Save Timeout Settings
The timeout settings affect how long your device stays
in training mode, for example, when you are waiting for
a race to start. Hold MENU, select Activities & Apps,
select an activity, and select the activity settings.
Select Power Save Timeout to adjust the timeout
settings for the activity.
Normal: Sets the device to enter low-power watch
Extended: Sets the device to enter low-power watch
Changing the Order of an Activity in the Apps
List
1 Hold MENU.
Garmin.com.sg/
2 Select Activities & Apps.
3 Select an activity.
4 Select Reorder.
• Select Off to disable GPS for the activity.
• Select GPS Only to enable the GPS satellite
system.
• Select GPS + GLONASS (Russian satellite
system) for more accurate position information
in situations with poor sky visibility.
• Select GPS + GALILEO (European Union satellite
system) for more accurate position information
in situations with poor sky visibility.
• Select UltraTrac to record track points and sensor
data less frequently
(UltraTrac, page
NOTE: Using GPS and another satellite together
can reduce battery life more quickly than using
GPS only
(GPS and Other Satellite Systems, page
40).
mode after 5 minutes of inactivity.
mode after 25 minutes of inactivity. The extended
mode can result in shorter battery life between
charges.
40).
Customizing Your Device
Advertisement
Table of Contents
