Front Panel; Back Panel - Pico Macom CA-30RK550 Installation And Operation Manual

CA-30RK550 Manual.qxd 9/9/03
Operation and
CA-30RK550

Front Panel

1. Power On LED:
Indicates power is on when lit.
2. R.F. Gain:
Adjust potentiometer for overall amplifier gain level.

Back Panel

1. OUT:
The amplified RF signal is
2. IN:
The input RF signal is connected to this
6 Ph: 800-421-6511
Rev. 08/03
3:02 PM Page 6
Controls
1
1
available at this port.
port.
www.picomacom.com
2 3
3. Tilt:
Adjust potentiometer provides for slope adjustment over entire bandwidth.
4. -30dB Output Test Monitor:
Output test point is provided for amplifier set up and monitoring.
3
3. Power Cord:
This three prong polarized power cord is approved by both UL and
CSA for safe operation of the amplifier. Do not cut the ground terminal
for both safety and operational reasons. Connect to 108 to 125 Vac,
50/60 Hz electrical outlet
4
3