MCM55 Manual.qxd
12/23/03
Operation and Controls
MCM55
3
5
Front Panel
1.
Gain Adjust:
Adjust potentiometer for overall amplifier gain level.
2.
Tilt Adjust:
Adjust potentiometer provides for slope adjustment over entire bandwidth.
3.
IN:
The input RF signal is connected to this port.
6
Ph: 800-421-6511
Rev. 06/03
11:51 AM
Page 6
1
www.picomacom.com
2
4.
OUT:
The amplified RF signal is available at this port.
5.
-20 dB Input Test Monitor:
Input test point is provided to monitor input level to the amplifier.
6.
-20 dB Output Test Monitor:
Output test point is provided for amplifier set up and monitoring.
7.
Power cable:
The power cable connects to a 120Vac, 60Hz wall adaptor.
4
6
7