Table of Contents
Advertisement
Manual wireless setup
Wireless Network can be set up by using the alternative
method.
a
Find your SSID (Network Name) and Network Key
(Password) on your wireless access point/router
and write them in the table provided below.
SSID (Network Name)
Network Key (Password)
SSID: XXXXXX
Network Key: XXXX
NOTE
• If you cannot find this information, ask your network
administrator or wireless access point/router
manufacturer.
b
Go to your machine, and press
Fi Network] > [Yes].
c
Select the SSID (Network Name) for your access
point/router and enter the Network Key
(Password). When the wireless setup is successful,
the Touchscreen displays [Connected].
NOTE
• If you can't connect, check the following:
(Wireless network)
Restart your wireless access point/router (if possible). >
Restart your machine and computer, and then repeat
from step
a
.
(Wired network/USB connection)
Disconnect the cable > Restart your machine and
computer and then repeat from step
7
> [Find Wi-
a
.
Advertisement
Table of Contents
