Table of Contents
Advertisement
e
When the printer list appears, tap the printer you
want to register. When registration is complete, a
check mark appears beside the printer name.
• If the wireless network connection setup for the machine
cannot be completed, tap [Wireless LAN Guidance] and
refer to the guidance to set up the wireless network
connection.
• If multiple printers are connected to the same network,
select the one to be used.
• When setting up a Brother cutting machine and sewing
machine compatible with Artspira, select the machine to
be used from the screen in step
according to the on-screen instructions.
This completes printer setup from a mobile device.
Refer to "Fabric handling" (P.8) to load the Fabric Roll.
d
, and then set it up
Connect your computer to your machine
a
Visit https://s.brother/lpqrg/ to download and
install the Brother software.
NOTE
• (Windows) You must install the Brother software if you
want to print on Fabric Roll.
b
Follow the on-screen instructions and prompts.
NOTE
• For Wired Network Connection and USB Connection,
locate the correct port (based on the cable you are using)
inside the machine as shown.
Setup Finished. You can now print using your machine.
Important Notice for Network Security
The default password to manage this machine's settings is
located on the back of the machine and marked "Pwd". We
recommend immediately changing the default password to
protect your machine from unauthorised access.
6
Advertisement
Table of Contents
