Mounting The Seat - KTM 450 EXC-F 2018 Setup Instructions

3 WORK
3.11
3.12
3.13
26
Removing the seat
V00342-10

Mounting the seat

V00343-10
V00342-10
Removing the battery
Warning
Risk of injury Batteries contain harmful substances.
–
Keep batteries out of the reach of children.
–
Keep sparks and open flames away from the batteries.
–
Only charge batteries in well-ventilated rooms.
–
Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance
–
Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge
–
Dispose of batteries with less than the minimum voltage correctly.
–
Remove screws 1 .
–
Raise the rear of the seat, pull the seat back, and lift it off.
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
1 m (3 ft)
9 V
1 .
M6 10 Nm (7.4 lbf ft)