Tighten Screw - KTM 450 EXC-F 2018 Setup Instructions

3 WORK
3.6
3.7
22
Adjusting the headlight range
V00369-10
Installing the shock absorber
E00804-10
Preparatory work
–
Check the headlight setting. (
Main work
–
Loosen screw 1 .
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower marking for a motorcycle with rider (instructions on
how to apply the marking: Checking the headlight setting).
Info
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
1

Tighten screw

.
Main work
–
1
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top M12
shock absorber
–
Mount and tighten screw
Guideline
Screw, bottom M12
shock absorber
Info
The heim joint for the shock absorber at the swingarm
is Teflon-coated. It must not be greased with grease or
with other lubricants. Lubricants dissolve the Teflon
coating, thereby drastically reducing the service life.
Finishing work
–
Remove the motorcycle from the lift stand. (
p. 21)
to the side and position the shock
2
.
80 Nm (59 lbf ft)
Loctite ®
3
.
80 Nm (59 lbf ft)
Loctite
®
p. 19)
2701™
2701™