Fujitsu PalmSecure SDK V02 Installation Manual page 45

3.2 Uninstalling the Sensor Driver in Windows XP / Vista / 7 Environments Manually
Disconnect the Sensor.
Step8
The Found New Hardware Wizard is displayed
★Tip
The Found New Hardware Wizard may be displayed
depending on the timing.
Click the [Cancel] button.
A message is displayed at the bottom right of the screen to
★Tip
inform that the device driver cannot be installed
The following message may be displayed at the bottom right of
the screen to inform that the device driver cannot be installed
in a Windows 7 environment; however, this does not cause any
problems. Ignore the message.
35