Fujitsu PalmSecure SDK V02 Installation Manual page 32

Chapter2 Installing the Sensor Driver by Using Installer Version
When installing under Windows XP environment, the initial screen of
the Found New Hardware Wizard is displayed. Continue the procedure
from Step 10.
★Tip
Step10 Select [Install the software automatically (Recommended)], and click
the [Next] button.
The OS detects the Sensor, and the Completing the Found New
Hardware Wizard screen is displayed.
★Tip
Step11 Click the [Finish] button.
The Completing the Found New Hardware Wizard screen is closed.
Step12 If there are multiple USB ports where the Sensor may be connected,
the Sensor must be detected on each USB port. Disconnect the Sensor
from the target hardware and repeat steps 9 to 11 again.
A message to confirm connection to Windows Update is
displayed
A message to confirm connection to Windows Update may be
displayed at the beginning of the Found New Hardware
Wizard screen in a Windows XP environment.
Select [No, not this time] and click the [Next] button.
A dialog box indicating that the driver has not passed the
Windows Logo testing is displayed
A dialog box indicating that the driver has not passed the
Windows Logo testing may be displayed in a Windows XP
environment.
In that case, click the [Continue Anyway] button to continue
the process.
22