Hardware And Software Requirements; Conventional Sensor Driver (Windows Version) - Fujitsu PalmSecure SDK V02 Installation Manual

Chapter1 Preliminary Steps before Installing the Sensor Driver

Hardware and Software Requirements

1.2
The following describes hardware and software requirements for installing the
Sensor driver.

Conventional Sensor Driver (Windows Version)

◆
Hardware and Software
Requirements
CPU
Memory
(Note 2)
Hardware
USB
Requirement
HDD space
(Note 3)
Sensor
OS (Note 4)
Software
Requirement
Sensor driver
(Note 5)
Note 1) Use an Intel® Core™ 2 Duo 2.40GHz or faster CPU when identifying or
using the detailed information notification function for the guidance
image display.
>See>
>See>
Intel® Core™ 2 Duo 2.40GHz or more
Intel® ULV Celeron® 650MHz or more for Windows XP (Note 1)
(must also comply with the recommended value for the given OS)
x86 version : 1GB or more
x64 version : 2GB or more
However, 256 MB or more for Windows XP
(must also comply with the recommended value for the given OS)
USB 2.0 only
3 MB or more
・PalmSecure Sensor
・PalmSecure Sensor V2
For information on the firmware version level on the Sensor
unit, refer to the "System Development Guide".
・Windows XP SP3 (x86)
・Windows Vista SP2 (x86 and x64)
・Windows 7 SP1 (x86 and x64)
Download the latest version from the SDK Support Website
For information on the identification, refer to the "System
Development Guide" and "Authentication Library Reference
Guide".
For information on the detailed information notification function
for the guidance image display, refer to the "Authentication
Library Reference Guide".
8
Description