Sound Menu - Samsung SyncMaster 9 Series User Manual

Basic Features
Noise Filter options until the TV displays the
best picture.
Auto Visualization: When changing analog channels,
displays signal strength.
✎
Only available for analog channels.
✎
When bar is green, you are receiving the best
possible signal.
■ MPEG Noise Filter (Off / Low / Medium / High /
Auto): Reduces MPEG noise to provide improved
picture quality.
■ HDMI Black Level (Normal / Low): Selects the black
level on the screen to adjust the screen depth.
✎
Available only in HDMI mode.
■ Film Mode (Off / Auto1 / Auto2): Sets the TV to
automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (480i / 1080i).
■ Auto Motion Plus (Off / Clear / Standard / Smooth /
Custom / Demo): Removes drag from fast scenes with
a lot of movement to provide a clearer picture.
✎
The Info screen on your TV displays the resolution
and frequency of the incoming signal (60Hz), but
not the frequency the TV is generating for the
image it is displaying by using Auto Motion Plus
function.
✎
If noise occurs on the screen, please set up the
Auto Motion Plus to Off. If Auto Motion Plus
is Custom, you can set up the Blur Reduction,
Judder Reduction or Reset manually.
✎
If Auto Motion Plus is Demo, you can compare
the difference of on and off modes.
Blur Reduction: Adjusts the blur reduction level from
video sources.
Judder Reduction: Adjusts the judder reduction level
from video sources when playing films.
Reset: Reset the custom settings.
Reset Picture (Yes / No)
Resets your current picture mode to its default settings.
Setting up the TV with Your PC
¦
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC may differ in which case the
same basic set-up information will almost always be applied.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on "Control Panel" on the Windows start menu.
2. Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3. Click on "Display" and a display dialog box will appear.
30
English
4. Navigate to the "Settings" tab on the display dialog-box.
x
The correct size setting (resolution)
– [Optimum : 1920 X 1080 pixels]
x
If a vertical-frequency option exists on your display
settings dialog box, the correct value is "60" or "60
Hz". Otherwise, just click "OK" and exit the dialog
box.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
y Straighten your back.
y Keep a distance of 45~50 cm (15~19 inches) from your
eyes to the screen. Look down at the screen and face
the screen forwards.
y Adjust the angle of the product so that light is not
reflected onto the screen.
y Keep your elbow at a right angle and keep your arm
level with the back of your hand.
y Keep your elbow at a right angle.
y Place your heels flat on the ground while keeping your
knees at an angle of 90 degrees or higher and maintain
the position of your arm so that your arm is below your
heart.

Sound Menu

Changing the Preset Sound Mode
¦
O
MENUm → Sound → Sound Mode → ENTERE
Sound Mode
t
y Standard: Selects the normal sound mode.
y Music: Emphasizes music over voices.
y Movie: Provides the best sound for movies.
y Clear Voice: Emphasizes voices over other sounds.
y Amplify: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
✎
If Speaker Select is set to External Speaker, Sound
Mode is disabled.