Checking The Frame; Checking The Swingarm; Checking Throttle Cable Routing - KTM 250 EXC TPI 2018 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.39
12.40
12.41
94

Checking the frame

S01316-10

Checking the swingarm

S01317-10

Checking throttle cable routing

E00888-01
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
Info
Always replace a frame that has been dam-
aged due to a mechanical impact. Repair of the
frame is not authorized by KTM.
–
Check the swingarm for damage, cracking, and deformation.
» If the swingarm shows signs of damage, cracking, or defor-
mation:
–
Change the swingarm.
Info
Always change a damaged swingarm. Repair of
the swingarm is not authorized by KTM.
Preparatory work
–
Remove the seat. ( p. 80)
–
Remove the fuel tank.
Main work
–
Check throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars, above the fuel tank bracket on
the right of the frame to the throttle valve body. Both
throttle cables must be secured behind the fuel tank
contact area rubber band.
» If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
( p. 85)