Location In The Rack - IBM 3453-C2E Customer Install Manual

Location in the Rack

The base IBM Cloud Pak for Data System consists of four main components (1G
switch, 25G switch, two compute chassis) that are designed to be integrated in the
same rack with PDUs. The recommended component placement is shown in Figure 2
below. Other configurations can be used if IBM Safety Notices translations Pub # G229-
9054 rules are followed, and the lengths of the supplied cables are not exceeded. The
Cloud Pak for Data System requires all IBM supplied and serviceable components
to be installed below the 42U height.
chassis and connector nodes, must be located at or below U26.
Figure 2. Front view of installed base Cloud Pak component locations.
42
41
40
39
38
37
36
35
34
Left Power
33
32
31
30
29
28
27
26
25G Switch
25
24
23
22
21
12
11
10
9
8
7
6
5
4
3
2
1
© Copyright IBM Corporation 2019, 2020, 2021.
4U Blank Panel
2U Blank Panel
2U Blank Panel
PDU # 2 Right Power
PDU # 1
2U Blank Panel
1U Blank Panel
1U Blank Panel
1G Switch
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
1U Blank Panel
Chassis 2
1U Blank Panel
Chassis 1
1U Blank Panel
Components on slides, such as server
Labeled "MGT1A"
Labeled "FAB1A"
Labeled "2"
Labeled "1"
Customer Install Guide, 2U Chassis 19