Viewing A List Of Saved Tracks; Editing A Saved Track; Saving A Track As A Route; Browsing For And Navigating A Recorded Track - Garmin echoMAP CHIRP 45 Series Owner's Manual

Viewing a List of Saved Tracks

Select User Data > Tracks > Saved Tracks.

Editing a Saved Track

1 Select User Data > Tracks > Saved
Tracks.
2 Select a track.
3 Select Edit Track.
4 Select an option:
• Select Name, and enter the new name.
• Select Track Color, and select a color.

Saving a Track as a Route

1 Select User Data > Tracks > Saved
Tracks.
2 Select a track.
3 Select Edit Track > Save Route.
Browsing for and Navigating a Record-
ed Track
Before you can browse a list of tracks and
navigate to them, you must record and save
at least one track (Tracks, page 21).
1 Select User Data > Tracks > Saved
Tracks.
2 Select a track.
3 Select Follow Track.
4 Select an option:
• To navigate the track from the starting
point used when the track was created,
select Forward.
• To navigate the track from the desti-
nation point used when the track was
created, select Backward.
5 Review the course indicated by the col-
ored line.
6 Follow the line along each leg in the
route, steering to avoid land, shallow
water, and other obstacles.

Deleting a Saved Track

1 Select User Data > Tracks > Saved
Tracks.
2 Select a track.
3 Select Delete.

Deleting All Saved Tracks

Select User Data > Manage Data > Clear
User Data > Saved Tracks.
22

Retracing the Active Track

The track currently being recorded is called
the active track.
1 Select User Data > Tracks > Follow
Active Track.
2 Select an option:
• Select the time the active track began.
• Select Entire Log.
3 Review the course indicated by the col-
ored line.
4 Follow the colored line, steering to avoid
land, shallow water, and other obstacles.

Clearing the Active Track

Select User Data > Tracks > Clear Ac-
tive Track.
The track memory is cleared, and the
active track continues to be recorded.
Managing the Track Log Memory
During Recording
1 Select User Data > Tracks > Active
Track Options.
2 Select Record Mode.
3 Select an option:
• To record a track log until the track
memory is full,select Fill.
• To continuously record a track log,
replacing the oldest track data with new
data, select Wrap.
Configuring the Recording Interval of
the Track Log
You can indicate the frequency at which
the track plot is recorded. Recording more
frequent plots is more accurate but fills the
track log faster. The resolution interval is
recommended for the most efficient use of
memory.
1 Select User Data > Tracks > Active
Track Options > Record Interval > Inter-
val.
2 Select an option:
• To record the track based on a distance
between points, select Distance >
Change, and enter the distance.
• To record the track based on a time
interval, select Time > Change, and
enter the time interval.
• To record the track plot based on a
variance from your course, select
Introduction