Deleting A Waypoint Or An Mob; Deleting All Waypoints; Routes; Creating And Navigating A Route From Your Present Location - Garmin echoMAP CHIRP 45 Series Owner's Manual

3 Select Navigate To.
4 Select an option:
• To navigate directly to the location,
select Go To.
• To create a route to the location, includ-
ing turns,select Route To.
• To use Auto Guidance, select Guide
To.
5 Review the course indicated by the ma-
genta line.
NOTE: When using Auto Guidance, a
gray segment within any part of the ma-
genta line indicates that Auto Guidance
cannot calculate part of the Auto Guid-
ance line. This is due to the settings for
minimum safe water depth and minimum
safe obstacle height.
6 Follow the magenta line, steering to avoid
land, shallow water, and other obstacles.

Deleting a Waypoint or an MOB

1 Select User Data >Waypoints.
2 Select a waypoint or an MOB.
3 Select Delete.

Deleting All Waypoints

Select User Data > Manage Data > Clear
User Data > Waypoints > All.

Routes

A route is a sequence of waypoints or loca-
tions that leads you to your final destination.
Creating and Navigating a Route From
Your Present Location
You can create and immediately navigate a
route on the Navigation chart or the Fishing
chart. This procedure does not save the
route or the waypoint data.
NOTE: The offshore Fishing chart is avail-
able with premium charts, in some areas.
1 From the Navigation chart or Fishing
chart, select a destination.
2 Select Navigate To > Route To.
3 Select the location of the last turn before
the destination.
4 Select Add Turn.
5 If necessary, repeat step 3 and 4 to add
additional turns, working backward from
the destination to the present location of
your vessel.
The last turn you add should be the first
20
turn you make, starting from your present
location. It should be the turn closest to
your vessel.
6 If necessary, select MENU.
7 Select Navigate Route.
8 Review the course indicated by the ma-
genta line.
9 Follow the magenta line, steering to avoid
land, shallow water, and other obstacles.

Creating and Saving a Route

This procedure saves the route and all the
waypoints in it. The starting point can be
your present location or another location.
1 Select User Data > Routes > New >
Route Using Chart.
2 Select the starting location of the route.
3 Follow the on screen instructions to add a
turn.
4 If necessary, repeat step 3 to add more
turns.
5 Select the final destination.

Viewing a List of Routes

Select User Data > Routes.

Editing a Saved Route

You can change the name of a route or
change the turns the route contains.
1 Select User Data > Routes.
2 Select a route.
3 Select Edit Route.
4 Select an option:
• To change the name, select Name, and
enter the name.
• To select a waypoint from the turn list,
select Edit Turns> Use Turn List, and
select a waypoint from the list.
• To select a turn using the chart, select
Edit Turns> Route Using Chart, and
select a location on the chart.
Browsing for and Navigating a Saved
Route
Before you can browse a list of routes and
navigate to one of them, you must create
and save at least one route.
1 Select User Data > Routes.
2 Select a route.
3 Select Navigate To.
4 Select an option:
Introduction